[Deptheads] Gamex 2015

[Strategicon Department Heads]

I still have access to 3d modeling software, so I can create the files that
the 3d printers use. What about creating shells the go over the wood and
pipe bases, screw on to the wood, but would not be the main structural
support.

The material is about $25 per Kg.

Mike Fryer


On Wed, Feb 18, 2015 at 11:25 AM, Strategicon Department Heads <
deptheads at strategicon.net> wrote:

> Message From: Shane Sauby  ssshanucon at yahoo.com
>
> Something simple and functional is all I am looking for.  The bases we
> have right now actually work fine, but they are very Home Depot DIY.  I
> would even be okay if someone took the bases we have, which I am sure are
> in storage now, and painted or covered them so they don't look like a piece
> of pipe screwed into a piece of wood (which is exactly what they are).
>
> Ballast is not a big issue.  If you look at the bases we have now, they
> are literally a 3" square pieces of wood.  There was really no need for
> ballast in the nice bases that were made.  I don't know why the pennies
> were ever added.  In fact, I think they might have hurt more than helped,
> by giving the bases enough heft to break each other when being stored.
>
> Shane Sauby
> Boardgames Supervisor
>
>
>   On Wednesday, February 18, 2015 10:34 AM, Strategicon Department Heads <
> deptheads at strategicon.net> wrote:
>
>
> I have been thinking about new (or additional) bases for a while. My
> intention would be to leave the bases on the tables and swap out flags, but
> that's a discussion for a later time.
>
> As far as base design goes, I think Kens machine would leave us in the
> same pickle of needing ballast. Using bases like mine would work and I was
> considering talking to one of our vendors to laser up something to fit on
> top that says Strategicon and any other info we need. They would look nice
> and be somewhat resilient.
>
> Just throwing it out there. I welcome all feedback.
>
> Mike
>
>
>
>
> On Feb 18, 2015, at 10:22 AM, Strategicon Department Heads <
> deptheads at strategicon.net> wrote:
>
> Message From: Tanya Aldrich  taldrich at strategicon.net
>
> What about those 3-D art things, Something-Maker, Ken at Payouts was
> displaying stuff last year. We're not not necessarily looking for the
> quality you produced, but the wood bases are the complete opposite. I think
> Shane would be good with a compromise.
>
> Main requirements, looks decent, doesn't break easily, stays standing.
> Am I wrong?
>
> Tanya
>
> On Feb 17, 2015, at 11:01 PM, Strategicon Department Heads wrote:
>
> Message From: Mike Fryer  darkbeerdrinker at gmail.com
> There are a lot of places that do rapid prototyping, none of them will be
> in our budget. The machine I made those on cost 1 million. My company
> decided that was better than paying a parts house (industry slang for a
> place that does that kind of work). I could get quotes and let you know.
> _______________________________________________
> Deptheads mailing list
> Deptheads at strategicon.net
> https://strategicon.net/cgi-bin/mailman/listinfo/deptheads
>
>
> _______________________________________________
> Deptheads mailing list
> Deptheads at strategicon.net
> https://strategicon.net/cgi-bin/mailman/listinfo/deptheads
>
>
> Message From: Mike James  minis.tyrant at gmail.com
>
> _______________________________________________
> Deptheads mailing list
> Deptheads at strategicon.net
> https://strategicon.net/cgi-bin/mailman/listinfo/deptheads
>
>
>
> _______________________________________________
> Deptheads mailing list
> Deptheads at strategicon.net
> https://strategicon.net/cgi-bin/mailman/listinfo/deptheads
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://strategicon.net/archives/deptheads/attachments/20150218/f6e5c7f2/attachment.html>